ARE Ascensori Logo

Lifts and home lifts for domestic contexts

ARE offers tailor-made solutions for private homes that guarantee maximum comfort and safety in every movement. Our lifts and home lifts for domestic contexts stand out for their elegance, silence and ability to fit perfectly into their surrounding environment. In addition to improving accessibility, these systems ensure significant energy savings and optimised space management.

Discover ARE solutions for Home

Customised lifts for Home

Every home lift is tailor-made to meet the specific needs of the customer: from shapes and dimensions, right down to customised finishes. Thanks to a vast choice of materials and colours, solutions can be created that blend in perfectly with the architectural style of any home, and become design elements that enhance their surroundings.

* in switch mode the power used is 1200W and 1500W during rapid recharging.
These values refer to a system with a load capacity of 450kg at a speed of 0.15m/s
** In countries outside the EU the speed is 0.30 m/s and the power used is 230W

The benefits of home lifts

ARE designs and manufactures lifts and home lifts that improve the quality of life inside homes. These systems make it easy to move between floors, ensuring the house is more accessible for everyone, especially the elderly or people with reduced mobility. ARE solutions are also efficient from an energy point of view. They have a low environmental impact and limited running costs.

No more compromises: choose your tailor-made home lift
The advantages of ARE

Absolute adaptability

When structural, space or regulatory constraints limit choices it is extremely important to have a highly customisable solution, while keeping the quality and reliability of an industrial product unchanged. Every ARE lift for people with disabilities, without exception, is tailor-made to meet the customer’s requirements.

Frequently asked questions

Have a doubt or curiosity about our electric lifting platforms? Scroll through the list below. If the doubt persists, please contact us.

A battery-powered lifting system guarantees high levels of energy efficiency, thanks to its low consumption of electrical energy from the national grid and its recovery system that stores energy in the batteries during operation, so it can be used in subsequent runs. From this point of view, battery power offers system users greater safety.

Certainly! The vast range of materials and finishes available for the cabin walls and floors offers multiple customisation options. You can also choose different automatic or hinged door models to adapt the lift to the context in which it will be installed.

You can choose between two cabin models:

Monolith which has an elegant, sober design

Elegant that has an elegant, cutting-edge design

Download our MANGUSTA and ZEN-0 brochures to view all these features in detail

Yes it can, as long as the floor complies with the maximum thickness required (15 mm for the MANGUSTA lift, 10 mm for the MINIWATT lift, 20 mm for the ZEN lift)

With our lifting devices, there is no need for space to house oleodynamic control units and control panels. The motor unit is located inside the lift well and the control panel can be incorporated into a landing door.

Yes, all our lifts feature soft arrivals and departures. The silence achieved by our ARE SMART-POWER technology gives lift passengers a pleasant sensation of comfort throughout every run.

Batteries are the main power supply system used on our lifts. So our lifts can continue to be used even in the event of a sudden power failure, so accessibility and safety are guaranteed at all times.

Yes, because our MANGUSTA and MINIWATT lifts use just 130W** of power whereas the ZEN-0 lift uses only 300W.* The power used by a microwave oven is more than this (700W).

* In switch mode the power used is 1200W and 1500W during rapid recharging. These values refer to a system with a load capacity of 450kg at a speed of 0.15m/s

**In countries outside the EU the power used is 230W

Yes, our technical department can design customised solutions that meet installation requirements even in environments with limited space.

Normally, the electronics for reading the load sensor are positioned on the cabin roof, so that is where the calibration procedure has to be conducted. This means the technician has to take care not to include their own weight in the measurements. It also means that for any information about the weight in the cabin you always have to climb onto the roof. In our system, on the other hand, the load sensor reading electronics are still positioned on the cabin roof, but they are connected to the control panel. So, all operations (calibrations, cabin weight readings, fault diagnoses etc.) are carried out from our Smart-Chopper board, i.e. the control panel.

Certainly! The vast range of materials and finishes available for the cabin walls and floors offers multiple customisation options. You can also choose different automatic or hinged door models to adapt the lift to the context in which it will be installed.

With our lifting devices, there is no need for space to house oleodynamic control units and control panels. The motor unit is located inside the lift well and the control panel can be incorporated into a landing door.

You can choose between two cabin models:

  • Monolith which has an elegant, sober design
  • Elegant that has an elegant, cutting-edge design
  • Download our MANGUSTA and ZEN-0 brochures to view all these features in detail

Yes it can, as long as the floor complies with the maximum thickness required (15 mm for the MANGUSTA lift, 10 mm for the MINIWATT lift, 20 mm for the ZEN lift)

Yes, all our lifts feature soft arrivals and departures. The silence achieved by our ARE SMART-POWER technology gives lift passengers a pleasant sensation of comfort throughout every run.

Batteries are the main power supply system used on our lifts. So our lifts can continue to be used even in the event of a sudden power failure, so accessibility and safety are guaranteed at all times.

Yes, because our MANGUSTA and MINIWATT lifts use just 130W** of power whereas the ZEN-0 lift uses only 300W.* The power used by a microwave oven is more than this (700W).

* In switch mode the power used is 1200W and 1500W during rapid recharging. These values refer to a system with a load capacity of 450kg at a speed of 0.15m/s

**In countries outside the EU the power used is 230W

Yes, our technical department can design customised solutions that meet installation requirements even in environments with limited space.

Contact ARE to find the perfect solution for your needs

    Decoration image

    Other ARE solutions

    WeARE