ARE Ascensori Logo

Frequently asked questions

The answers to your doubts

Have you got a question you want answered about our electric lifts and home lifts?
Scroll the list below. If you don’t find a suitable answer, contact us.

The main power supply for our ARE systems is based on the use of lead-acid batteries, which are widely used in the automotive world. They guarantee a long service life, low costs and excellent performance. Like all batteries, they have a lifecycle, which is long and can be replaced for a limited cost.

Yes, all our lifts feature soft arrivals and departures. The silence achieved by our ARE SMART-POWER technology gives lift passengers a pleasant sensation of comfort throughout every run.

The main power supply for our ARE systems is based on the use of lead-acid batteries, which are widely used in the automotive world. They guarantee a long service life, low costs and excellent performance. Like all batteries, they have a lifecycle, which is long and can be replaced for a limited cost.

Yes, all our lifts feature soft arrivals and departures. The silence achieved by our ARE SMART-POWER technology gives lift passengers a pleasant sensation of comfort throughout every run.

With the batteries charged and under optimal usage conditions, up to 40 runs can be made. This ensures efficient service even during a blackout.

In this case, Switch mode* is activated, i.e. the lift’s power supply shifts from batteries to mains, and the passenger is informed with an illuminated icon. The lift moves more slowly so it remains within the parameters of the electricity meter installed until the required battery charge level is reached.

* in switch mode the power used is 1200W and 1500W during rapid recharging. These values refer to a system with a load capacity of 450kg at a speed of 0.15m/s

Yes, ZEN-0 has a higher speed that can reach up to 0.8 m/s.

  1. A battery-powered lifting system guarantees high levels of energy efficiency, thanks to its low consumption of electrical energy from the national grid and its recovery system that stores energy in the batteries during operation, so it can be used in subsequent runs. From this point of view, battery power offers system users greater safety as it allows the lift to be used even in the event of a blackout.

Normally, the electronics for reading the load sensor are positioned on the cabin roof, so that is where the calibration procedure has to be conducted. This means the technician has to take care not to include their own weight in the measurements. It also means that for any information about the weight in the cabin you always have to climb onto the roof. In our system, on the other hand, the load sensor reading electronics are still positioned on the cabin roof, but they are connected to the control panel. So, all operations (calibrations, cabin weight readings, fault diagnoses etc.) are carried out from our Smart-Chopper board, i.e. the control panel.

Yes, ZEN-0 has a higher speed that can reach up to 0.8 m/s.

In this case, Switch mode* is activated, i.e. the lift’s power supply shifts from batteries to mains, and the passenger is informed with an illuminated icon. The lift moves more slowly so it remains within the parameters of the electricity meter installed until the required battery charge level is reached.

* in switch mode the power used is 1200W and 1500W during rapid recharging. These values refer to a system with a load capacity of 450kg at a speed of 0.15m/s

With the batteries charged and under optimal usage conditions, up to 60 runs can be made. This ensures efficient service even during a blackout.

Yes, all our lifts feature soft arrivals and departures. The silence achieved by our ARE SMART-POWER technology gives lift passengers a pleasant sensation of comfort throughout every run.

The main power supply for our ARE systems is based on the use of lead-acid batteries, which are widely used in the automotive world. They guarantee a long service life, low costs and excellent performance. Like all batteries, they have a lifecycle, which is long and can be replaced for a limited cost.

Contact ARE to find the perfect solution for your needs

    Message [/textarea]

    Decoration image
    WeARE